Shop

Catalog Products

  • Views:

Pages:
    • original

      Copper Laminated Lap

      from $29.99

      Economy copper-laminated lap for pre-polishing or polishing.

      SOLD OUT!
    • original

      Tin Plus polishing lap (TIn+)

      from $78.00

      This is a tin alloy laminated polishing lap. The alloy hardness is halfway between Pure Tin and BATT. It is gentler in use than harder alloys; charges easily; and gives excellent results with stones from hardness 4 and up.

    • original

      Dia-Z+ Two-Zone Polishing Lap

      $148.00

      The DiaMatrix™ polishing surface is a toughened, hardened version of the Matrix™ polishing lap, but with a lower complexity that forces a high concentration monolayer on the surface of the lap, providing significantly sharper meets and flatter facets. It is optimized for diamond use, and in particular, for use with Voodoo Magic Faceting Polish. The Zinc+ prepolish surface is hard, flat, and slick - seldom causes orange peel the way copper can - and ideal for use with Voodoo 3k or 8k!

    • original

      Academy of Faceting Artists in Tucson, 2017 Sweat-shirt

      $34.99

      If you missed Tucson, or missed us in Tucson, or just didn't get a shirt when you saw us, here's your chance to get your very own bright, colorful, pretty, original, limited edition, limited time, limited quantity, exclusive, Academy of Faceting Artists "Tucson, 2017" sweat shirt just like the one I was wearing a the show! (while supplies last)

    • original

      Academy of Faceting Artists Mug

      $24.99

      If you missed Tucson, or missed us in Tucson, or just didn't get a mug when you saw us, here's your chance to get your very own bright, colorful, pretty, original, limited edition, limited time, limited quantity, exclusive, Academy of Faceting Artists beverage mug just like the one I was drinking from in Tucson. (while supplies last)

    • original

      Academy of Faceting Artists in Tucson, 2017 T-shirt

      $24.99

      If you missed Tucson, or missed us in Tucson, or just didn't get a shirt when you saw us, here's your chance to get your very own bright, colorful, pretty, original, limited edition, limited time, limited quantity, exclusive, Academy of Faceting Artists "Tucson, 2017" T-shirt! (while supplies last)

    • original

      Ultra Tec Transfer Stand

      $356.00

      One of the most important pieces of the faceting equipment kit, this device has many more uses than just transferring stones from one dop to another...

    • original

      Acrylic Master Lap

      $19.99

      Economic 8-inch acrylic master lap for calibration operations, supporting toppers, etc.

    • original

      Aluminum Master Lap

      $34.99

      High-quality, AMERICAN-MADE, flat-running, full 8-inch diameter, full 1/4-inch-thick master lap for calibration operations and to support topper laps.

    • original

      Plastic Master Lap 6-inch

      $12.99

      Plastic SIX-INCH master lap for calibration operations and to support topper laps. This is the super-economy option.

    • Faceting Academy Site Membership

      $0.00

      Site Membership Summary

    • original

      Cablap™ & Double Cablap™

      from $49.90

      These special grooved, hard fiber phenolic laps by Crystalite are used for final shaping and polishing of sapphire, ruby and garnet (not for faceting). The laps retain their diamond compound charge efficiently. (Double Cablap™ lap, 2 grooves; Cablap™ lap, 1 groove). A 1/2” arbor hole is standard.

    • original

      Oxy-lap™ Polishing Films

      from $15.97

      These thin film final polishing laps are made with conventional abrasives. They come in packs of 3 and have standard 1/2 inch arbor holes. These laps require a master lap to support them.

      SOLD OUT!
    • original

      Dot Disc™ Faceting Laps

      from $185.85

      You can handle large work pieces with ease. These dot pattern discs feature aggressive, fast cutting action for rough cabbing and preforming large faceted stones. They are ideal for cutting large flat areas where hydroplaning and grinding force are factors. Standard 1/2” arbor hole.

      SOLD OUT!
    • original

      Ripple Disc™ Faceting Laps

      from $176.40

      The fast cutting 100 mesh disc cuts like a 40 mesh and the 180 mesh disc cuts like a 60 mesh. It is excellent for rough cabbing and preforming large faceted stones. As the tips of the ripple forms wear, fresh diamond is exposed, permitting the disc to remain sharp throughout its long life. This disc will cut agate with ease. Standard 1/2” Arbor hole.

    • original

      Channel Disc™ Faceting Laps

      from $132.06

      These discs have a uniquely shaped working surface of randomly interspersed islands. The resulting channels flush away debris and prevent the stone from pulling excessively on the lap. These are great for rough cutting facets and grinding cabochon backs.

    • original

      Crystalmet™ Sintered Diamond Laps

      from $647.17

      These sintered metal bond diamond discs are made with Crystalite proprietary bond formulation. Manufactured for the lapidary industry, Crystalmet™ discs will provide an excellent finish, long life and an aggressive cutting action. They are ideal for those who want high volume production and long life from their discs. Standard 1/2 inch arbor hole.

      SOLD OUT!
    • original

      Ultra Tec Lamp

      $82.00

      Moffatt task lamp for the Ultra Tec faceting machine. Bayonet mount fits the OEM lug on Ultra Tec machine decks, and the goose-neck is the proper length for working.

    • original

      Crystalite Solid Steel Discs

      from $150.97

      Crystalite solid steel laps are absolutely flat and parallel, to meet the most exacting faceting requirements. These discs have a corrosion resistant copper undercoating. A 1/2” arbor hole.

      SOLD OUT!
    • original

      Crystalite Standard Faceting Laps

      from $137.31

      Crystalite standard discs are used by commercial cutters worldwide and are excellent for faceting. The aluminum backs are ground flat and parallel to exacting standards and are made with 100% diamond and bonded with a hard electroplated nickel. They come with a 1/2 inch arbor hole.

    • original

      Topper Laps

      from $14.99

      Inexpensive topper laps for rough-shaping. NOTE: A master lap must be used with these.

    • original

      Diamond Wire Saw

      from $33.72

    • original

      Primecut™ Diamond Saw Blades

      $193.37

      These diamond saw blades set a new standard for thin diamond blades. Manufactured with Crystalite proprietary diamond plating process, these 100/120 mesh blades will cut faster, last longer and run truer than any other blade they offer.

      SOLD OUT!
    • original

      Zinc Plus Prepolishing lap

      from $72.00

      Zinc is a traditional lap material that works great for a variety of cutting and polishing applications. This lap is very flat and smooth-running. It is an outstanding pre-polish lap when combined with our Voodoo 3k pre-polish. You will remove damage from gross cutting - and adjust meets - very quickly, leaving very flat and smooth facets that will polish quickly and easily!

Pages: