Catalog Products
- Views:
-
-
Tin Plus polishing lap (TIn+)
from $78.00
This is a tin alloy laminated polishing lap. The alloy hardness is halfway between Pure Tin and BATT. It is gentler in use than harder alloys; charges easily; and gives excellent results with stones from hardness 4 and up.
-
Dia-Z+ Two-Zone Polishing Lap
$148.00
The DiaMatrix™ polishing surface is a toughened, hardened version of the Matrix™ polishing lap, but with a lower complexity that forces a high concentration monolayer on the surface of the lap, providing significantly sharper meets and flatter facets. It is optimized for diamond use, and in particular, for use with Voodoo Magic Faceting Polish. The Zinc+ prepolish surface is hard, flat, and slick - seldom causes orange peel the way copper can - and ideal for use with Voodoo 3k or 8k!
-
Academy of Faceting Artists in Tucson, 2017 Sweat-shirt
$34.99
If you missed Tucson, or missed us in Tucson, or just didn't get a shirt when you saw us, here's your chance to get your very own bright, colorful, pretty, original, limited edition, limited time, limited quantity, exclusive, Academy of Faceting Artists "Tucson, 2017" sweat shirt just like the one I was wearing a the show! (while supplies last)
-
-
Academy of Faceting Artists Mug
$24.99
If you missed Tucson, or missed us in Tucson, or just didn't get a mug when you saw us, here's your chance to get your very own bright, colorful, pretty, original, limited edition, limited time, limited quantity, exclusive, Academy of Faceting Artists beverage mug just like the one I was drinking from in Tucson. (while supplies last)
-
Academy of Faceting Artists in Tucson, 2017 T-shirt
$24.99
If you missed Tucson, or missed us in Tucson, or just didn't get a shirt when you saw us, here's your chance to get your very own bright, colorful, pretty, original, limited edition, limited time, limited quantity, exclusive, Academy of Faceting Artists "Tucson, 2017" T-shirt! (while supplies last)
-
Ultra Tec Transfer Stand
$356.00
One of the most important pieces of the faceting equipment kit, this device has many more uses than just transferring stones from one dop to another...
-
-
Acrylic Master Lap
$19.99
Economic 8-inch acrylic master lap for calibration operations, supporting toppers, etc.
-
Aluminum Master Lap
$34.99
High-quality, AMERICAN-MADE, flat-running, full 8-inch diameter, full 1/4-inch-thick master lap for calibration operations and to support topper laps.
-
Plastic Master Lap 6-inch
$12.99
Plastic SIX-INCH master lap for calibration operations and to support topper laps. This is the super-economy option.
-
-
Cablap™ & Double Cablap™
from $49.90
These special grooved, hard fiber phenolic laps by Crystalite are used for final shaping and polishing of sapphire, ruby and garnet (not for faceting). The laps retain their diamond compound charge efficiently. (Double Cablap™ lap, 2 grooves; Cablap™ lap, 1 groove). A 1/2” arbor hole is standard.
-
Oxy-lap™ Polishing Films
from $12.61
These thin film final polishing laps are made with conventional abrasives. They come in packs of 3 and have standard 1/2 inch arbor holes. These laps require a master lap to support them.
-
Dot Disc™ Faceting Laps
from $185.85
You can handle large work pieces with ease. These dot pattern discs feature aggressive, fast cutting action for rough cabbing and preforming large faceted stones. They are ideal for cutting large flat areas where hydroplaning and grinding force are factors. Standard 1/2” arbor hole.
-
Ripple Disc™ Faceting Laps
from $176.40
The fast cutting 100 mesh disc cuts like a 40 mesh and the 180 mesh disc cuts like a 60 mesh. It is excellent for rough cabbing and preforming large faceted stones. As the tips of the ripple forms wear, fresh diamond is exposed, permitting the disc to remain sharp throughout its long life. This disc will cut agate with ease. Standard 1/2” Arbor hole.
-
Channel Disc™ Faceting Laps
from $132.06
These discs have a uniquely shaped working surface of randomly interspersed islands. The resulting channels flush away debris and prevent the stone from pulling excessively on the lap. These are great for rough cutting facets and grinding cabochon backs.
-
-
Crystalmet™ Sintered Diamond Laps
from $647.17
These sintered metal bond diamond discs are made with Crystalite proprietary bond formulation. Manufactured for the lapidary industry, Crystalmet™ discs will provide an excellent finish, long life and an aggressive cutting action. They are ideal for those who want high volume production and long life from their discs. Standard 1/2 inch arbor hole.
-
Ultra Tec Lamp
$82.00
Moffatt task lamp for the Ultra Tec faceting machine. Bayonet mount fits the OEM lug on Ultra Tec machine decks, and the goose-neck is the proper length for working.
-
Crystalite Solid Steel Discs
from $150.97
Crystalite solid steel laps are absolutely flat and parallel, to meet the most exacting faceting requirements. These discs have a corrosion resistant copper undercoating. A 1/2” arbor hole.
-
-
Crystalite Standard Faceting Laps
from $137.31
Crystalite standard discs are used by commercial cutters worldwide and are excellent for faceting. The aluminum backs are ground flat and parallel to exacting standards and are made with 100% diamond and bonded with a hard electroplated nickel. They come with a 1/2 inch arbor hole.
-
Topper Laps
from $24.99
Inexpensive topper laps for rough-shaping. NOTE: A master lap must be used with these.
-
-
